When you buy through links on our site, we may earn an affiliate commission. Learn more here.

Ultimate Guide To Choosing The Best Minimalist Running Shoes For Beginners (2022)

So you’ve decided to nix the claims of increased performance and comfort of traditional running shoes and enter the world of barefoot or minimalist running. 

Like any other sport, minimalist running requires knowledge of the sport, consistent training, and the right equipment.

As you begin your journey, we have prepared this minimalist running shoes guide to help you zero in on what to look for in a quality running shoe, the benefits of this style of running, and the different types of minimalist shoes that are available.


Our #1 Minimalist Running Shoe for Men & Women: Merrell Trail Glove 4 Trail-Running Shoes

✓ Check Men’s Shoe Price at Amazon

✓ Check Women’s Shoe Price at Amazon

→ This low profile running shoe features Vibram® TC5+ rubber outsoles and has enough protection for light trails.

Top 7 Best Women’s & Men’s Minimalist Running Shoes for the Money

Know Your Barefoot Running Style

Before you can select the right pair of minimalist shoes, it would be helpful to pinpoint your individual barefoot running style.

Proper running mechanics is crucial, especially when it comes to barefoot running, to prevent injury and increase comfort while running.

Foot strike mechanics refer to the sequence your feet take when striking the ground – and what portion of your foot touches the ground first.

Do you run heel first strike like most runners in typical running shoes, or have you practiced and adopted one of preferred barefoot running styles – mid-foot strike or forefoot strike.

Knowing your barefoot running style will help you select the right minimalist running shoes.

Depending on your preferred foot strike style or merely out of preference you will need to decide on either “zero heel drop” or “low heel drop” minimalist shoes- and how much if any, cushioning in the rear and forefoot is best for your running style.

Here is a description of each type of running foot strike styles:

  • Forefoot Strike – is the running style referred to when a person runs ‘on the balls of their feet’.  Sprinters run with a forefoot strike because it is faster – and it has less impact on the knees. But this style will put more stress on the runner’s legs and calf, therefore it is not recommended for distance running. When running forefoot, the balls of foot strike the ground first and the heel may or may not brush the ground surface. Runners who use a forefoot strike tend to have a bounce when they run.
  • Mid-foot Strike – spreads the running impact across a larger portion of the foot and reduces the overall force of running, especially to the knees. Mid-foot running resembles running ‘flat-footed’. A true mid-foot landing strikes the ground behind the ball of the foot and results in a softer landing with less ground impact. Most marathon runners will switch from forefoot running to a mid-foot strike when fatigue sets in.
  • Heel Strike – (or rear-strike) is the manner in which 80% of traditional runners will strike the ground. With heel strike running, the lower leg will momentarily pause in motion as the heel impacts the ground first. This running style causes the heel to absorb most of the impact, which is what prompted running shoe manufacturers to increase the thickness and cushioning of the rear portion of running shoes. (Heel strike running style is not recommended for minimalist runners).

Benefits of Barefoot Running

woman running in minimalist running shoes

Obviously, since the beginning of human existence, people have run with their bare feet.

As time went on, a minimum amount of foot covering in the form of moccasins or sandals afforded runners and walkers more comfort and safety.

But we are inherently conditioned from birth to walk and run without the aid of footwear.

Footwear with arch supports, rigid soles, and cushioned heels are modern inventions created to increase the strength, comfort and life cycle of shoes – but they are not necessities.

There are many benefits in getting rid of the over-supported running shoes with bulky heels.

Take a look at runners who take part in some of our countries most elite marathon races.

The winners are often those from third-world countries and more than likely spent much of their training – running barefoot.

Here are some of the benefits when wearing running shoes with a minimum of padding and support:

  • minimalist running shoes feels more like a natural extension of your foot
  • reduces the force of impact when running because of the change in stride
  • Increased flexibility of minimalist shoes supports the natural flexing of the runner’s foot
  • removing or lowering the heel-to-toe drop has shown to reduce the risk of injury
  • better body alignment when the forward body tilt caused by heeled running shoes is eliminated
  • minimalist style running protects the lower-limbs and feet from impact injury
  • a mid-foot running strike is the most efficient form of running
  • barefoot running promotes a smooth and fluid style of running

For many runners, the greatest benefit of this natural style of running is that it simply feels good.

Runners will practice developing excellent barefoot running form by increasing the frequency of the stride and decreasing the time of foot contact with the ground.

The proper style and fit of minimalist running shoes can make all the difference in your barefoot running technique.

barefoot running on beach
credit: DepositPhotos

Minimalist vs Traditional Running Shoes

Traditional running shoes are built to overcome the modern runner’s environment.

The primary design purpose of mainstream or consumer running shoes is to provide cushioning to lower the impact of asphalt and concrete running surfaces.

Traditional running shoes are built to stabilize foot motion.

That is the natural side-to-side motion of the foot which is an inward roll for some people, and an outward roll for others.

Motion-control technology and impact reduction are the mainstays of the traditional consumer running shoe.

Sport or professional running shoes will offer a customized design with varying levels of cushioning, flexibility, and arch support.

Companies like Nike, New Balance, and Asics make customized lines of running shoes fit for specific terrains, training vs. racing, sprint vs. distance, and to correct certain gait problems.

The traditional thinking has been – the runner that selects the perfect fit of running shoe, built for the specific style of running, and is wearing the best shoe available.

High-performance running shoes recognize the fact that put motion-control properties in shoes have little impact on reducing injury to runners.

Removing the excessive cushioning and materials of standard running shoes naturally make the shoes lighter, which requires the runner to expend less energy.

The thinner shoe material found in these high-performance running shoes will also enhance the tactile feeling of the foot meeting the running surface – meaning the runner can actually ‘feel’ the run.

Minimalist running shoes are built to present the least amount of interference with the running surface while allowing for the maximum amount of natural movement.

The Journal of Foot and Ankle Research has developed a rating index system to define and clarify standard categories which can be applied to the types minimalist running shoes sold in the US.

The index ratings will decrease from excellent (5) to not-so-good (0), on a scale of 0-5 within five categories of shoe properties for a maximum of 25 points:

  • Shoe Weight – 5 points for shoes that weight less than 4.4 oz. or 125 grams – 0 points for shoes that weigh over 11.5 oz. or 325 grams
  • Stack Height – (or sole thickness at the heel) 5 points if less than 8 millimeters – 0 points if over 32 millimeters
  • Shoe Stability – points are lost for every added foot motion-control technology
  • Heel to Toe Drop – 5 points for less than 1 millimeter – 0 point over 13 millimeters
  • Flexibility – points are split between twisting flexibility (torsional) and folding flexibility (longitudinal)

The total score for a great shoe would be 25 points.

The key is not finding a 25 point running shoe, but finding the shoe with the five elements combined in the right ratio for your particular running style, stride, and foot features.

For instance, a high score on shoe flexibility may not be as important to the runner as the shoe weight.

Diehard minimalist runners may prefer 5 point stack height to better simulate the feeling of running barefooted.

Types of Minimalist Running Shoes

There are three types of running shoes in the category of minimalist or barefoot running shoes – silicone rubber, rubber composites, and synthetic materials.

Barefoot Running Shoes – (sometimes called low profile running shoes) will have no arch support and a zero drop from heel to toe.

You should also expect a bare minimum of comfort cushioning that is typically added to the heels of most running shoes to minimize impact.

The sole of a barefoot running shoe will be very thin – typically between 3 mm and 10 mm.

All features which support motion control and all cushioning is removed from these types of shoes.

You have likely seen the style of barefoot running shoe where each toe digit has a separately fitted sleeve, similar to how a glove fits on a hand.

These very thin-soled shoes are the closest you can get to barefoot running – that is, with some covering on your feet.

Here are some options to think about when you are considering the most minimum or barefoot running shoes.

  • Silicone rubber barefoot running shoes are extremely thin and are used primarily during training and not for actual trail running. It gives the runner the opportunity to condition the feet before truly running ‘barefoot’. Check out the Evoskin brand of silicon rubber shoes which are marketed for running on grass. One caution with silicone rubber is that your feet may get a bit warm and sweaty due to the reduced breathability of silicone rubber.
  • Rubber composite barefoot running shoes constructed of high-performance rubber at the sole of the foot, along with a stretchable shoe frame which molds to the shape of the wearer’s foot. Look into the Vibram brand of high-tech composite running shoes which are extremely popular for barefoot running. It may take practice learning how to get into these types of snug fit barefoot running shoes.
  • Synthetic materials patented with proprietary engineered materials to allow for maximum protection for the foot, while maintaining a good ‘ground feel’. These types of shoes will also possess design features to improve balance and foot dexterity.  West Marine is one manufacturer of synthetic barefoot shoes, which are marketed mainly to boaters, swimmers, and kayakers.

You may want to consider purchasing toe socks to absorb sweat and prevent the rubber and silicone materials from leaving a smell in the shoe. Injinji socks are a performance brand of fingered socks marketed to reduce blisters and absorb moisture while keeping out dirt and debris.

injinji running socks
credit: REI

Minimalist Running Shoes – (also referred to as low profile running shoes) will be constructed of some combination of the previous types of materials, but there is a difference between minimalist and barefoot running shoes.

These types of shoes will be closer to traditional running shoes yet feature a much reduced heel-to-toe drop (usually between 4-8mm.

There is minimum or zero arch support and the toe box is beefier than barefoot running shoes.

The leading brands of minimalist running shoes to explore include Nike, Asics, Merrell, and Vibram.

With that said, you will need to examine the features (or specs) when buying minimalist running shoes to determine which is best for your feet and your running style:

  • Amount of flexibility allowing the shoe to contour to the runner’s terrain, providing more power and grip.
  • Height of the shoe sole (or stack height) – the smaller the number the closer to the ground while running.
  •  Toe box area – choosing a wider toe box allowance give the toes more room to lay flat and natural.
  • Shoe weight – some may prefer a heavier low-profile shoe than others
  • Heel-to-Toe Drop – which is the height between the front and the back of the shoe (4 mm – 7 mm for minimalist shoes)

What to Look For in a Good Minimalist Running Shoe

The first consideration when choosing a minimalist running shoe is the fit.

These types of running shoes should “fit like a glove”, snug and secure on the foot without too much extra space around the toes (opposite from traditional running shoes).

If you plan to wear socks while running, make sure you are fitted with socks on.

You will also want to consider what material the shoes are made of and what the cleaning and care instructions are.

The best materials are those that are machine-washable (for obvious reasons). The type of shoe closure is also a personal choice either a quick-lace closure or strap closure.

Lace-up running shoes are usually preferred for those who desire better on/off – especially in the toe pocket.

Runners that land hard on the heels with each stride (common for those transitioning into minimalist running shoes) or those that run on roads as opposed to trails will usually wear out these types of running shoes quicker.

If this is the case, a heavier shoe weight and a greater stack height may be preferred.

Choose a pair of shoes that are specified for both trail and road if you are a hard lander.

When looking for a good minimalist running shoe, the best shoe will have a balance of different traits to suit your running style and running environment.

In the beginning, it is best to look for a good mix of flexibility both lengthwise and rotational, with a low drop, and are lightweight.

This way the runner is expending less energy, is running faster and can run more comfortably for longer lengths of time.

As a beginner, you may prefer a shoe with more cushioning before transitioning to ‘barely there’ running shoes.

Of course, for runners with flat feet, an increased arch support would be desirable in the shoe selection.

For those runners who tend to roll their ankles outward or inward when running (under or overpronation), shoes with additional side support may be preferred.

The verdict is still out – while some experts say barefoot running is better for this physical tendency, and some say it is detrimental.

Stay in good physical shape and know your body. Joint discomfort or persistent pain are signs that your shoes or running style may need to be adjusted.

When you advance to running on rocky and technically diverse terrains, choose a shoe with more rotational support and less flexibility.

In this way, you add more support to help prevent your ankle from rolling.

Technical trail running is an advanced sport which combines the skills of both minimalist running and rough outdoor terrains.

The sport includes running, hiking, climbing, and jumping – all in the most natural and rugged settings in nature.

The shoes will need to have exceptional grip and are usually rubber soles.

Minimalist Running Considerations

The right minimalist running shoe will of value in helping you transition from traditional running styles.

With the thinner soles, you will notice an enhanced sensory perception of the ground being transmitted through your feet.

Your leg and core muscles will automatically become stronger and more agile.

You will develop a shorter and more efficient running stride.

It is usually not advised to transition too quickly from padded running shoes to minimalist style shoes.

Respect the fact that your feet will experience a shock from not being pampered by padding and supports.

To reduce injury, and until you develop the proper barefoot running stride, opt for the greater stack height and heavier shoe weight in the beginning.

In selecting a beginners pair of minimalist running shoes, focus on the following three factors:

  1. weight – select a heavier 8-10 ounce shoe
  2. heel-to-toe drop – start from 7-10 millimeters and later reduce to 4-6 millimeters
  3. thicker sole – reduces the impact of heel strikes when transitioning running stride

The key is to create a transitional plan to gradually move from a heavier shoe to lightweight to minimalist to nearly bare.

In the meantime, you are gradually building up mileage and conditioning your feet to handle the natural terrains.

As with any sport, increasing your level of fitness will add to your growth as a minimalist runner.

Modifying your running form and your gait takes time and practice.

But with the right type of running shoes, you will find the transition is much smoother and plagued with less injury.

Additional Resources:

Leave a Comment